If I needed a piece of foam thinner, thicker or different sheet size to your standard, is this possible?

Yes this is easy! The foams are widely converted into other sizes for final use (contact your local supplier for further information).

Thickness - thinner sheets (down to around 2mm) can be obtained by splitting (skiving) the sheet. Thicker sheets can be fabricated by either heat laminating sheets together (up to around 300mm) or by adhesive bonding.

Length and Width - can be cut using simple equipment such as bandsaws, etc. Other methods used are die stamping, water jet cutting.

 
<< Back to FAQs